Riffraff Diesel Cam Position Sensor CPS 1994-2003 7.3L
Remember the original International "Black CPS" that originally came with the Powerstroke? Your engine idled smoother, had better cylinder contribution, and overall better drivability but unfortunately it was discontinued almost 20 years ago. The industry has been forced to make due with the updated "Grey CPS" and sacrifice those original attributes until now...
We have developed a brand new CPS that has all the original qualities, with the addition of 20 year newer chip and sensor technology! With this new technology and manufacturing knowledge we have been able to accurately increase the signal strength and clarity at more than double the air gap and rpm the original "Black CPS" was able to sense with no degradation of signal. This allows for more realized benefits and reliability than even the original "Black CPS was able to provide.
- ISO 14001 and IATF 16949 production facility
- Sensors are function tested on an actual 7.3L Cam gear for 100% accuracy
- Assembly process is re-validated biannually on all sub-components
Product Disclaimer: Cam Position Sensors may stop working unexpectedly during vehicle operation, causing the vehicle engine to shut off, this is a inherent defect of this system engineered by Ford Motor Company® since original vehicle production and disclosed throughout Ford literature due to there only being a single sensor source. Riffraff Diesel® is not liable for any damages, losses, or inconveniences caused by this known factory defect, to the extent permitted by law. This product is sold AS IS, with no implied warranties of merchantability for fitness for a particular purpose, unless otherwise required by applicable law. Product warranty for this defect are not covered under the standard warranty. Please review the full terms of sale and warranty before purchase. Your use of this product constitutes acceptance of these terms.
120 Reviews Hide Reviews Show Reviews
-
Riffraff CPS
Installed this CPS along with the HPX and FRX at the same time. My truck runs quieter and smoother! After reading a few reviews about the CPS being difficult to install, I made sure the o-ring was lubed well, got it started along with the bolt and slowly tightened the bolt until CPS was fully seated. Easy install. The previous CPS was the black with purple o-ring and I pushed that easily in by hand. Haven’t been able to test if there is a fuel mileage difference yet.
-
Cps
Didn’t see any difference when putting the new one in.
-
Riffraff cps
Truck had no issues to begin with other than old cps o ring leaking and runs great with the updated cps also. Using the old one as a spare. Time will tell, but am sure it will outlive me
-
Perfect upgrade/replacement
Installed in 1996 7.3 in about 15 minutes. Truck fired right up afterwards and seems to idle better and run well.
-
Improved 7.3 cps
Worked as advertised, smother idle.
Definitely an improvement. Thank you. -
Cam sensor
Truck runs a lot smoother starts right up cylinder test was pasted with the old gray one Truck ran ruff had 3 cylinder that failed
-
99.5 F-350 7.3, 6 speed
Heard the CPS and pigtail from RiffRaff was the only way to go on this. Been nothing but solid for me on parts I’ve ordered in past.
-
Amazing product
This cam sensor smoothed out and woke up my 02 super duty. Better mpg, better throttle response, and runs soo much better. I highly recommend this part.
-
Cam Position Sensor Upgraded CPS 94-03 7.3L
This CPS upgrade made my 2001 7.3 idle so much smoother and quieter I was shocked. What a great upgrade from the old gray parts store one I had.
