Categories
- Ford > 94-97 'OBS' 7.3L > Riffraff Diesel Products
- Ford > 94-97 'OBS' 7.3L > Tuners / Programmers / Power Adders > Edge Products
- Ford > 99-03 Super Duty 7.3L > Tuners / Programmers / Power Adders > Edge Products
- Ford > 00-03 Excursion 7.3L > Tuners / Programmers / Power Adders > Edge Products
- Hot New Products
- Ford > 99-03 Super Duty 7.3L > Riffraff Diesel Products
- Ford > 00-03 Excursion 7.3L > Riffraff Diesel Products
- Ford > 03-07 Super Duty 6.0L > Riffraff Diesel Products
- Ford > 03-05 Excursion 6.0L > Riffraff Diesel Products
-
Increased Reliability In One Step. The Riffraff Diesel HPOP Billet Mini Spacer(Post)
If you own a 1994–2000 7.3L Powerstroke, you’re likely missing the benefit of the low-pressure oil mesh screen found on later 2001–2003 models. Most don't understand that the HPOP takes it's supply di
Riffraff Diesel Billet HPOP Reservoir Cover for 1999–2003 7.3 Powerstroke(Post)The 7.3 Powerstroke HPOP reservoir cover is one of those small parts that gets annoying fast when the fill plug is stripped, the cover is tired, or the reservoir needs to be topped off without making
Riffraff Diesel Billet HPOP Reservoir Body for 1996–2003 7.3 Powerstroke(Post)The 7.3 Powerstroke HPOP reservoir feeds oil to the high-pressure oil system. When the factory cast reservoir cracks, leaks, or has damaged threads, it can create oil leaks in the valley and make diag
Top 10 Must-Have 7.3L Powerstroke Products (Proven Upgrades & Fixes)(Post)The 7.3L Powerstroke (1994–2003) earned its reputation the old-school way: simple, durable, and willing to work for a living. But even the legendary 7.3 has predictable wear points—especially now that
New Product: JIC FPR Billet Housing w/ Pressure Shim Springs for 1999–2003 7.3 Powerstroke(Post)The stock 7.3 fuel bowl FPR housing works… until it doesn’t. The cast threads can bind, strip, or flat-out snap if there’s contamination in the threads or the compression fitting gets over-tightened.
Full Step By Step How To: 7.3L Billet Manifold Plenums(Post)Parts Required: Riffraff Diesel Billet Manifold Plenums 1994-2003, including: (2) Billet plenums (2) Viton o-rings (1) Installation hardware packet Recommended Parts: Turbo/pedestal o-ring kit: P
The 7.3L Timing Cover: The Good, The Bad, The Ugly, and The Billet Replacement(Post)Arguably one of the most complex parts on a 7.3. Just about everything runs through the front timing cover or heavily relies on it doing its job correctly. The OE front cover has done its job amazingl
Full Step by Step how To: Billet Intake Manifold Plenums 1994-2003 7.3L Powerstroke(Post)Full PDF Instructions can be downloaded here: https://www.riffraffdiesel.com/content/RESOURCES/Riffraff_Diesel_Billet_Plenum_Instructions.pdf Product Link: https://www.riffraffdiesel.com/riffraff-dies
Riffraff Diesel Billet Intake Manifold Plenums for 1994–2003 7.3 Powerstroke(Post)The factory 7.3 Powerstroke intake plenums are thin stamped metal, and the intake mouths can bend from clamp pressure. Once that happens, the truck can develop boost leaks at the boots or plenum seal—
Low Pressure Oil Filtration - Not all 7.3's are built the same(Post)Good clean oil is extremely important to a 7.3L. Moreso than for most other engines. That's because the oil is used differently than with most other engines. The 7.3L injection system is more like a h
Go Billet and Delete the Check Valve: Fuel Bowl Billet Stand Pipe Assembly (1994–1997 OBS 7.3 Powerstroke)(Post)The OBS (1994–1997) 7.3 Powerstroke fuel bowl stand pipe is a known service headache because the factory piece is plastic, and it’s easy to crack or snap during removal; especially if someone forgets
Ditch the flimsy stamped steel plenums and go with the billet upgrade! 7.3L Powerstroke Billet Intake Manifold Plenums(Post)The factory-installed intake plenums on the 7.3L Powerstroke, quite literally, fail under pressure. Whether you've got a stock truck or one that's been hopped up, the thin stamped steel factory-instal
6.0L Powerstroke Billet Thermostat Housing FAQ(Post)The stock 6.0L Powerstroke thermostat housing has one job: seal. And then, eventually, it… doesn’t. Corrosion + heat cycles = seepage. Riffraff Diesel has the fix: The 6.0L Billet Thermostat Housing.
7.3 & 6.0 Powerstroke Billet Aluminum Thermostat Housings(Post)The Problem: The factory-installed thermostat housings on the 7.3 and 6.0 Powerstrokes are very prone to corrosion. Corrosion that eventually leads to coolant leaks. Leaks for either engine generally
7.3 Powerstroke Billet Compressor Wheel Upgrade (TP38/GTP38)(Post)If your 7.3 Powerstroke has ever done the turkey gobble / flutter thing under load, you’ve met compressor surge. In laymans terms, surge is teh turbo becoming innefficient/pushed too far for its desig
Riffraff Diesel Billet Non-EBPV Blank Pedestal for 1999.5–2003 7.3 Powerstroke(Post)The 7.3 Powerstroke turbo pedestal is one of the usual suspects when oil shows up in the valley, down the back of the engine, or around the passenger-side up-pipe. On EBPV-equipped trucks, the actuato
Motorcraft IPR Valve for 7.3 Power Stroke (1996–2003): Symptoms, Fixes, and Install Tips(Post)The 7.3L Power Stroke’s HEUI system runs on high-pressure oil, and the Injection Pressure Regulator (IPR) controlls how much oil the HPOP actually sends to the injectors. When the IPR is happy, the tr
Riffraff Diesel Billet Valve Cover Set for 1994–2003 7.3 Powerstroke(Post)The factory 7.3 Powerstroke valve covers do their job, but they are still thin stamped covers on a 20+ year old truck. When sealing matters, rigidity matters. That’s why we built the Riffraff Diesel B
Powerstroke Billet Oil Fill Riser for 1994-2010 7.3L, 6.0L and 6.4L(Post)If you’ve owned an older 7.3L, 6.0L, or 6.4L Powerstroke for any length of time, you already know what years of engine heat do to factory plastic. The oil fill riser is no different. They get brittle,
7.3 Powerstroke Billet Thermostat Housing for 1999–2003: Fixing Corrosion and Coolant Leaks(Post)A 7.3 Powerstroke thermostat housing leak often starts small—coolant smell, dried residue near the upper hose, or a slow drip that usually only shows up after a heat cycle. On 1999–2003 7.3L trucks, a






