OCR - Overboost Code Regulator™ for Ford 7.3L 99-03
The purpose of the OCR™ is to regulate the presence of an "overboost code" that sets the Service Engine Soon light and stop the PCM from defueling at 23 psi of boost. We are the first to utilize a pre-set custom regulator that will allow your MAP Sensor to see up to 22psi before holding it there. With the use of a pre-set regulator it doesn't allow there to be human error when setting it or to accidently be adjusted out of the correct setting. By using this highly accurate regulator your performance will not be hampered or degraded. You can perform this same mod your self with a compressor regulator from a hardware store, but from experience we have learned that these models can be extemely inaccurate at low psi levels. Because of the inaccuracy and inability to hold the pressure at the same psi you end up adjusting it down there by losing performance. Our OCR™ was made to prevent overboost, but it doesn't enhance performance, it allows the computer to perform past what would normally be an overboost condition. If you aren't building over 23+ and experiencing defueling then this product isn't what you are looking for.
To make this a true bolt on product, and not just a cheaper bent hanger, we include a laser cut, black anodized custom bracket that moves your MAP sensor and allows for a clean looking install.
Fitment: 99-03 F250-F550 7.3L ; 2000-2003 Excursion 7.3L
221 Reviews Hide Reviews Show Reviews
-
No more 1211 Code
Stumbled on this while running around Clay's site.
So Far AWESOME. Haven't thrown 1211 code yet mashing the pedal in 65 hp Daily Driver Hydra tune. Will see how it goes next time I tow my 5th wheel up a big grade.
Kudos Clay -
Works awesome
I was getting so tired of hearing my turbo spool loud and getting into it and bam! That check engine light would go off. I would already know what it was and by the 100th time I was getting tired of having to clear it. This fixes that problem and she spools as much as she wants to now.
-
I love it
Great product does what it says it needs to do look great under the engine bay love that it relocates your map sensor
-
No more overboost code !!
Couldn’t be happier can hit 40psi with no over boost code! Easy install and looks great! Just wish I would have put this on my truck along time.
-
Easy to install & no more over-boost codes
Very clean product and works as described. Purchased one from another vendor and had issues. This unit can not be accidentally adjusted from others (my kid) messing around under the hood. Purchase with confidence!
-
Works great
Fixes what it's supposed to, & looks like it's supposed to be there.
-
Great buy!
This installed in 20 minutes. Looks stock, and seems to be doing the trick. One thing to note is its set to a level that keeps the over boost code from Coming on so don't adjust it, it's a pain to get it adjusted again.
-
Perfect
Does exactly what it claims. I kept getting the engine light after installing a programmer. This item solved that problem.
-
Way better than the competition.
I ordered the boost fooler product from the competition 2 years ago. The one that needs oil and for you to pull on it with the ring.... I always had a lot of overboost codes even though I followed the pain in the ass maintenance.
Riffraff's OCR is way better quality with no overboost codes in comparison.
