OCR - Overboost Code Regulator™ for Ford 7.3L 99-03
The purpose of the OCR™ is to regulate the presence of an "overboost code" that sets the Service Engine Soon light and stop the PCM from defueling at 23 psi of boost. We are the first to utilize a pre-set custom regulator that will allow your MAP Sensor to see up to 22psi before holding it there. With the use of a pre-set regulator it doesn't allow there to be human error when setting it or to accidently be adjusted out of the correct setting. By using this highly accurate regulator your performance will not be hampered or degraded. You can perform this same mod your self with a compressor regulator from a hardware store, but from experience we have learned that these models can be extemely inaccurate at low psi levels. Because of the inaccuracy and inability to hold the pressure at the same psi you end up adjusting it down there by losing performance. Our OCR™ was made to prevent overboost, but it doesn't enhance performance, it allows the computer to perform past what would normally be an overboost condition. If you aren't building over 23+ and experiencing defueling then this product isn't what you are looking for.
To make this a true bolt on product, and not just a cheaper bent hanger, we include a laser cut, black anodized custom bracket that moves your MAP sensor and allows for a clean looking install.
Fitment: 99-03 F250-F550 7.3L ; 2000-2003 Excursion 7.3L
223 Reviews Hide Reviews Show Reviews
-
A must have with any performance chip/tuner
Way more reliable and cost effective than custom making one out of a regulator. Its preset and has a very clean install.
-
Should have come with new clamps and loom.
I've purchased a lot of things from riffraff and have been more than satisfied with them. Every kit has come with everything needed for installation except this one. It would have been such an easy thing to add new hose clamps and wire loom to protect the hoses. The existing clamps were too big for the new hose, so I ended up with a boost leak. I would have gladly paid a couple dollars more to keep from making a parts store run.
-
Needed if chipped.
What a difference it made. Any chip should be sold with it also.
-
5star rated products
How can I say this, I am not mechanically inclined at all, but installed this myself in no time at all.
Works flawlessly with no more check engine light, highly recommended! -
Looks like it was factory
Installed this on a customers truck, it looks and functions great, this is the only boost fooler I will be installing from now on.
-
Wonderful
It was easy to install and I throw no more boost codes
-
Won't regret it of you are getting ses light from over boosting.
This thing looks and works awesome. Very happy with my purchase as always from riffraff
-
FIXED SES light when over 20psi boost
After installing a TS 6 position chip the SES light would come on every time the boost went pass 20 psi. The light would go off about 15 seconds when the boost dropped below 20 psi. This easy to install item stopped the SES light form popping on every now and then. Item looks nice and clean when installed on the truck.
1999 7.3 L F-350 six speed trans with 246,000miles -
GETS RID OF SES LIGHT!
Works awesome and got rid of the annoying SES light in the dash! Easy to install. Looks right at home in the engine bay too, great RIFFRAFF item! Thanks!
