OCR - Overboost Code Regulator™ for Ford 7.3L 99-03
The purpose of the OCR™ is to regulate the presence of an "overboost code" that sets the Service Engine Soon light and stop the PCM from defueling at 23 psi of boost. We are the first to utilize a pre-set custom regulator that will allow your MAP Sensor to see up to 22psi before holding it there. With the use of a pre-set regulator it doesn't allow there to be human error when setting it or to accidently be adjusted out of the correct setting. By using this highly accurate regulator your performance will not be hampered or degraded. You can perform this same mod your self with a compressor regulator from a hardware store, but from experience we have learned that these models can be extemely inaccurate at low psi levels. Because of the inaccuracy and inability to hold the pressure at the same psi you end up adjusting it down there by losing performance. Our OCR™ was made to prevent overboost, but it doesn't enhance performance, it allows the computer to perform past what would normally be an overboost condition. If you aren't building over 23+ and experiencing defueling then this product isn't what you are looking for.
To make this a true bolt on product, and not just a cheaper bent hanger, we include a laser cut, black anodized custom bracket that moves your MAP sensor and allows for a clean looking install.
Fitment: 99-03 F250-F550 7.3L ; 2000-2003 Excursion 7.3L
223 Reviews Hide Reviews Show Reviews
-
Overboost regulator
I was getting a boost code every time I pulled my travel trailer up a hill and the performance would drop. This eliminated the code being set and the PCM cutting performance
-
Perfect Solution
I stumbled on this while searching through google for an overboost controller. After seeing lots of others, this is the only one with a clean, engineered solution. I don't know how other companies think a $8 air compressor regulator with a junk bracket is worth $55+ but I am glad I found this. I highly recommend to get rid of your SES light for over boost P1249. Easy install, and looks so professional when installed.
-
OCR
Works well, bracket is awesome, just get it and be done, literally a 5 minute install
-
Review
Very well made, looks nice compared to other brands that sell them with plastic hardware. Also the bracket that comes with it is professional and easy to install.
-
This thing works
I purchased this knowing that I would soon be over the 22 PSI and didn't want to go into limp mode. Well after installing all my parts that I got I'm hitting almost 30 psi and no problems.
-
OCR 99-03
Installed this regulator on a highly modified 7.3 truck. So far it seems to do exactly what it's advertised to do!
-
Worth Every Penny
Easy to install, cost effective, and gets the job done. The custom Riff Raff logo really sets it apart from the rest as well.
-
Easy to install overboost code regulator
Took only 10 minutes to install outside while it was snowing and 10 degrees out. Really clean design makes it look good in the engine bay, and most importantly my service light hasnt came on at all since I installed it so I can hit that 32 psi whithout any problems now.
-
Easy Instal
Fast shipping, 5 min install, and really looks right. Quality piece.
