OCR - Overboost Code Regulator™ 99-03

Part Number:
RDPOCR

Manufacturer:

$128.61
$112.87
(You save $15.74 )

OCR - Overboost Code Regulator™ for Ford 7.3L 99-03

The purpose of the OCR™ is to regulate the presence of an "overboost code" that sets the Service Engine Soon light and stop the PCM from defueling at 23 psi of boost.  We are the first to utilize a pre-set custom regulator that will allow your MAP Sensor to see up to 22psi before holding it there.  With the use of a pre-set regulator it doesn't allow there to be human error when setting it or to accidently be adjusted out of the correct setting.  By using this highly accurate regulator your performance will not be hampered or degraded.  You can perform this same mod your self with a compressor regulator from a hardware store, but from experience we have learned that these models can be extemely inaccurate at low psi levels.  Because of the inaccuracy and inability to hold the pressure at the same psi you end up adjusting it down there by losing performance. Our OCR™ was made to prevent overboost, but it doesn't enhance performance, it allows the computer to perform past what would normally be an overboost condition. If you aren't building over 23+ and experiencing defueling then this product isn't what you are looking for.

To make this a true bolt on product, and not just a cheaper bent hanger, we include a laser cut, black anodized custom bracket that moves your MAP sensor and allows for a clean looking install.

Fitment: 99-03 F250-F550 7.3L ; 2000-2003 Excursion 7.3L

install.jpg

Write a Review

221 Reviews Hide Reviews Show Reviews

  • 5
    Good quality, easy install

    Posted by Bernie on Dec 17th 2019

    Well made bracket, straight forward install, riff raff quality you come to expect

  • 5
    Works perfect

    Posted by Mark on Dec 4th 2019

    Bought this to coincide with a 38r big injectors and my tuner recomended it fits great easy install.

  • 5
    Boost

    Posted by carlos santana on Nov 28th 2019

    Very well made. Looks great!

  • 5
    Nice

    Posted by Chuck on Nov 16th 2019

    Nice product, easy to install and looks great. I have an early 99 PSD which has smaller turbo and injectors than the late 99-03 so even with the boost fooler I only pull about 3psi more than stock. The good thing though is my truck also shifts better because the boost fooler prevents it from de-fueling and up shifting too soon. Worth the $$.

  • 4
    Boost fooler

    Posted by Rhaun Cose on Nov 8th 2019

    Works well still get 30 psi boost and no check engine light. Easy to install

  • 5
    Ocr

    Posted by John taylor on Nov 3rd 2019

    2nd one I’ve bought. One for my 02 and one for my dads 99. Works perfectly. Will only see 20-22 psi so it won’t defuel now. You’ll need this to build over 25 psi. Hydra tunes will only hide the check engine light. Only down side is that my edge insight won’t accurately read boost over 20 psi because the fooler. It does it’s job perfectly. I’ll have to get an analog boost gauge

  • 5
    OCR - Overboost Code Regulator

    Posted by Nigel on Oct 12th 2019

    No longer setting a temporary Check Engine Light (CEL) after installing aftermarket turbo wheel and DP F5 chip which generates 30+ psi of boost.

  • 5
    eliminates boost codes

    Posted by Dan on Sep 27th 2019

    Works perfectly, couldn't be happier. Took 10-15 min to install. The hardest part was getting the old crusty hose off.

  • 5
    Overboost regulator

    Posted by Steve on Sep 24th 2019

    Excellent product. Look no further. You won’t regret it.