Complete CAC Intercooler Boot Kit Ford 7.3L Powerstroke 99-03
This complete kit consists of 6 pieces of 4-ply Aramid reinforced silicone hoses that are specially made for Riffraff Diesel to withstand extreme temperatures to approximately 500 degrees F (vs. standard couplers that are good to 350 degrees F) and have been tested up to 150 psi working pressure.
Available in Blue, Red, and Black.
You will need to measure the inlet and outlet size of your intercooler to know what you have. We do not make a universal boot that fit both because fitment should be snug. Your metal intercooler tubes are 3" on all years so you don't even need a tape measure, just take off the boot, flip it around and see if it will fit on the inlet/outlet of the intercooler. If you need help with sizing please give us a call to ensure you get what you need.
We offer Early 99 plenum boots as well. These can be identified by the small 2" plenum inlet where the 99.5-03 have a 3" plenum intake and the truck production date would be 12/7/98 or before. If you need help with sizing please give us a call to ensure you get what you need. We also offer clamp kits if you are still running your stock Ford clamps.
Riffraff CAC / Intercooler Boot Measuring
328 Reviews Hide Reviews Show Reviews
-
Awesome boots
Awesome boots! Thicker than oem boots, much nicer. So glad I finally ordered these and got them on the truck!
-
Great Quality
Purchased these boots along with the plenum inserts for my '02 F-250. These boots are much thicker than the factory ones and fit tighter helping to hold the higher boost pressures. As Clay states, they are longer than the factory boots, but will fit perfectly with a little finesse of the spider!
Great customer service, and fast shipping as always! -
CAC Intercooler Boot Kit for early '99
I placed the order. They were shipped the same day. Arrived on time. The quality of the boots exceeds the quality of the original factory boots. They greatly exceed the quality of the replacement boots Ford is now selling (poor quality and very thin). They are a good bit thicker than the original factory boots. Old clamps will work. Boost is up and the engine is quieter. The kit is considerably less expensive than the junk Ford sells. Great product and experience.....
-
awesome
Great boots. Way better than stock ones
-
What A Difference
Purchased these boots,Plenum Reinforcing Inserts, and a set of clamps for my 2000 F-250. My OEM boots were oil soaked and cracked. Clay's boots fit and installed easly. Much better quality over OEM. Replacing the spider with the new boots was a PITA due to the length on the bottom boots. Highly recommend all 3 products.
-
Huge improvement
Very good product. Suggest buying new clamps (also available at riff raff)with the boots
-
very durable
Great product, huge improvement over stock boots. The durability comes at a cost, boots were very stiff making it difficult to get them to flex around the pipes. Once installed they hold pressure without a problem.
-
Great Boots
I have had my RR boots for a few years now and they still look new. work rgeat
-
Great quality
Did a bunch of work to my truck and my old boots were oil soaked so ordered up a set of these. way better than stock! just remember to buy new clamps cause the stock ones will be pain to put on.
