Complete CAC Intercooler Boot Kit 99-03

Part Number:
RDPABK9903

Manufacturer:

$179.42
$164.93
(You save $14.49 )

Complete CAC Intercooler Boot Kit Ford 7.3L Powerstroke 99-03

This complete kit consists of 6 pieces of 4-ply Aramid reinforced silicone hoses that are specially made for Riffraff Diesel to withstand extreme temperatures to approximately 500 degrees F (vs. standard couplers that are good to 350 degrees F) and have been tested up to 150 psi working pressure.

Available in Blue, Red, and Black.

You will need to measure the inlet and outlet size of your intercooler to know what you have.  We do not make a universal boot that fit both because fitment should be snug.  Your metal intercooler tubes are 3" on all years so you don't even need a tape measure, just take off the boot, flip it around and see if it will fit on the inlet/outlet of the intercooler.  If you need help with sizing please give us a call to ensure you get what you need.

We offer Early 99 plenum boots as well.  These can be identified by the small 2" plenum inlet where the 99.5-03 have a 3" plenum intake and the truck production date would be 12/7/98 or before.  If you need help with sizing please give us a call to ensure you get what you need. We also offer clamp kits if you are still running your stock Ford clamps. 

Riffraff CAC / Intercooler Boot Measuring

install.jpg

Fits Early 99 (Before 12/7/98) and Late 99 through 2003 7.3L Powerstroke
Write a Review

328 Reviews Hide Reviews Show Reviews

  • 5
    Amazing

    Posted by Unknown on Mar 31st 2016

    I have no complaints against the product. The only thing I can say is to make sure you buy the clamps for these boots as the old factory clamps barely fit and you have to struggle to get them to fit around these boots.

  • 5
    icc

    Posted by Unknown on Mar 22nd 2016

    You will never blow these apart

  • 5
    Excellent Fit

    Posted by Yolty on Mar 21st 2016

    These boots are longer,thicker, more pliable and fit great. I also added the Plenum reinforcement inserts and replaced the clamps. What a great combo.

  • 5
    High quality boots fit perfectly

    Posted by Unknown on Mar 15th 2016

    The boots showed up quickly and fit perfectly on my 2000 F250. My oil leak problem is solved and I have noticeably more power.

    My only suggestion is to find good quality constant tension clamps for all locations. Ford has them on the hot side of the cooler but I added them to the cold side also. This is where my leak was.

  • 5
    geat quality, perfect fit and looks good too.

    Posted by jamey davis on Mar 14th 2016

    Best deal on boots and some of the best boots I've seen. Riffraff diesel is the shix......

  • 5
    total confidence

    Posted by Dave on Feb 16th 2016

    i have been purchasing parts from riffraff diesel for some time while building up my wife's f350. what more can i say i have bought a second set of cac boots for my f250. in my opinion if its sold, used or recommended by riffraff you are going to get your money's worth.

  • 5
    great boots

    Posted by Dano on Feb 16th 2016

    Another home run from riffraff. The boots are much heavier that the flimsy stock ones. Be sure to order new clamp kit also.

  • 5
    Top quality

    Posted by Unknown on Feb 15th 2016

    The boots are made extremely well. A few of my stock boots had holes, so i ordered the complete kit. A positive is they were a bit of a bear to get on. But fit and finish top notch. Look great, a must do item. Save yourself and buy from riffraff, you cant beat qaulity or service.

  • 5
    Complete CAC Boot Kit

    Posted by Oldboots 1950 Chuck Barnhart on Feb 8th 2016

    Boots come in by noon, I was finished installing by 3 PM. I used a couple of cotter pin tools to help put the boots on. There were no problems.