Cam Position Sensor CPS 94-03

Part Number:
F4TZ12K073C

Manufacturer:

$56.91
$38.71
(You save $18.20 )

Motorcraft Cam Position Sensor CPS 94-03 7.3L

CPS Comparision and Technical Data Sheet

Write a Review

280 Reviews Hide Reviews Show Reviews

  • 5
    Motorcraft or nothing!

    Posted by Unknown on Nov 14th 2014

    Wasted 25 on a Borg Warner replacement cps. Started to sputter once it got hot and through a code within a week. Order my oem replacement and haven't had an issue since. Lesson learned!

  • 5
    CPS Sensor

    Posted by Bill on Oct 28th 2014

    This fixed my '94.5 Powerstroke - now running reliably. If you run ok and then get very rough missing and then no start this may be it. It's a good thing to have as a spare anyway and is cheap.

  • 5
    pretty good so far

    Posted by Unknown on Oct 27th 2014

    This cps works well in my 2000 7.3l so far. I havent driven that far but my fuel mileage has not suffered and it runs nice.

  • 5
    Replaced as maintence

    Posted by Jim Beers on Oct 8th 2014

    I had just rebuilt the fuel bowl, replaced the IPR and ICP and the CPS. The IPR was the problem but after 13 years and 200k miles I figured to do some preventive maintence. Exursion 7.3 started right up and ran very smooth.

  • 5
    another great deal from riffraff on factory ford item

    Posted by matt on Oct 7th 2014

    Everyone should keep a spare CPS in their glove box. Thanks riffraff for the great price and always fast shipping

  • 5
    Problem solved

    Posted by Dwain Dempsey on Sep 6th 2014

    I replaced the grey replacement cps with this one and solved the rough idle and hesitation/jerking at highway speeds. I only wish I would have changed it sooner. The shipping was lightning fast! Great job!

  • 5
    Great product

    Posted by Jeff May on Sep 1st 2014

    Works great. Fast shipping. And would recommend Riffraff over and over. Great company.

  • 5
    OEM is a must!!

    Posted by Unknown on Sep 1st 2014

    Long story short: truck was idling badly and stalling so I bought a CPS from Oreillys. Installed sensor and started having intermittent problems with truck cutting/jerking/ whatever you want to call it around 2-2300 rpm. Replaced throttle position sensor, fuel filter, in line fuel pump, and dropped tank to clean fuel filters. Nothing worked. Ordered this OEM sensor from Riff Raff for cheaper than the aftermarket POS and it fixed the problem. Lesson learned!!

  • 5
    Works

    Posted by Cory on Aug 28th 2014

    Can't say much about this other than it works. OEM ford is the only way to go on the CPS.