Riffraff Diesel 7.3L Powerstroke Injector Cup / Sleeve Tool Set 94-03
Brand New Patented Design!
We have refined our injector cup/sleeve tools over the last 12 years, using them ourselves and as rental units, and we have now been awarded patents on their design and released them to production. These tools were designed for 7.3L gearheads by 7.3L gearheads.
Unlike our competitors’ cup tools, our design is engineered for efficient, repeated shop use removing and installing the injector cups. We believe removing and installing the injector cups should be a more surgical operation, not something requiring beating cups in with hammers and leaving brass filings from the removal process behind. Thus we have designed our tools with tight tolerances and clean injector bores in mind.
Since we utilize the latest in metallurgical and coating technology it allows us to thread our removal tool into the damaged injector cup without creating any filings or chips to fall into your cylinders. Both our puller and installation tool use bridges that are quickly fastened to the injector mounting holes, eliminating the need to remove your rocker arms and allowing for a faster overall job.
Our Patented install tool is really the breakthrough; rather than hammering on your new cups in tight spaces and hoping they are seated, simply use a socket and allow the tool to press the cup in. The tool allows for a completely seated cup every time; no guessing and no hammering, even on the back cylinders or e-series vans. To ensure our install tool doesn't deform your new cup as our competitors’ tools do, it is machined to engage both the full surface of the cup bottom and the top lip. The tool also features an o-ring as a keeper to allow strategic placement of the cup in the injector bore instead of dropping it in and risking displacement of your sealant. In order to allow the cup to seat without turning in the head, the install tool is engineered to include a ball bearing to prevent cup rotation while being pressed in. All hardware has been coated for rust resistance as well as to achieve a Rockwell hardness of over 62 to ensure a long life.
Features:
- 100% Manufactured and Assembled in the USA
- Made from 7075 Anodized Aluminum and Coated Grade 12.9 hardware
- Serviceable parts (if required)
- Patented Design
- "No Chip" Puller Design
- "No Impact" Installer Design
- Works on all F-Series as well as E-Series without removing heads
- Designed to work with headbolts as well as headstuds
- Includes mounting hardware 
*If you are looking to rent instead of purchase look under the injector cup for the optional rental
195 Reviews Hide Reviews Show Reviews
-
7.3L Injector sleeve tool kit
This tool kit far surpasses the conventional tools that I've used up till now. We were forced to do research when I was trying to replace injector sleeves in a van body. I had this kit overnighted to me and it worked great with the minimum clearance that you have in a van body. The concept of pressing in the sleeve instead of hammering them in is far better. The tool also holds onto the sleeve instead of just dropping the sleeve as you insert it into the head. The puller works better as well.
-
Finally
This is a must have tool if you work on 7.3 psd's.
-
Grate
La herramienta está súper nítida me encanto y trabajo perfecto.
-
Fretted about doing this, but this tool was a huge relief!
Very nice set of tools! Once I figured out the right amount of torque to bite into the cup just enough to extract, but not make it hard to remove the cup from the tool afterwards, it was smooth sailing for the rest of the cups! The threaded nature of the installation tool also worked in the very tight areas at the rear cylinders. If I changed injector cups for a living I would buy these in a second. Thank goodness this tool is available as a rental. The 'kit' I purchased included the injector cups, injector O rings and the correct LocTite. I have zero reasons to look at anyone else's tool.
-
Great tool.
This is a tool that has one purpose and does it extremely well. It removes and installs injector cups with the greatest of ease. I did not use the other peoples tool, as it looked difficult to get into the back cylinders. Instead I splurged and bought this tool. I considered renting it, but I don't generally like rental tools and love buying tools. I am extremely pleased. I have been a mechanic for over 30 years. I have bought lots of tools. For its use, and the price difference between this tool and the other cheaper tool, this is well worth the extra expense. It could not have worked better.
The only change I would like to make it to put a flat bearing and washers under the nut on the removal tool. It is probably not necessary, I just think it would improve the tool. -
7.3l must have
Awesome tool! I am a 15yr ford senior master diesel technician and this is one of the best tools I've ever purchased. Very well built out of quality material. Definitely offsets the price of the tool considering how well it was made.
-
Great tool
Changed cups with motor in frame, works great. No way you could use a drive tool to seat cups. This tool is the best for the job.
-
Best resource for diesel products period!
Clay has an excellent reputation for a reason. I had questions regarding a tool rental. He was away at an event and still answering my emails! Riffraff is the only place I will give my business!
-
EXCELLENT!!
Even though I never had the opportunity to use any other cup extraction or insertion tool, their descriptions accurately depict how they function. Riffraff's tool is very well made (and in the USA), the quality is high...10 out of 10...but the ease and simplicity of use is incomparable. Works EXACTLY as described. No effort or struggle to remove or install the cups. Thank you very much for making what could have been an involved process so much simpler.
