OCR - Overboost Code Regulator™ for Ford 7.3L 99-03
The purpose of the OCR™ is to regulate the presence of an "overboost code" that sets the Service Engine Soon light and stop the PCM from defueling at 23 psi of boost. We are the first to utilize a pre-set custom regulator that will allow your MAP Sensor to see up to 22psi before holding it there. With the use of a pre-set regulator it doesn't allow there to be human error when setting it or to accidently be adjusted out of the correct setting. By using this highly accurate regulator your performance will not be hampered or degraded. You can perform this same mod your self with a compressor regulator from a hardware store, but from experience we have learned that these models can be extemely inaccurate at low psi levels. Because of the inaccuracy and inability to hold the pressure at the same psi you end up adjusting it down there by losing performance. Our OCR™ was made to prevent overboost, but it doesn't enhance performance, it allows the computer to perform past what would normally be an overboost condition. If you aren't building over 23+ and experiencing defueling then this product isn't what you are looking for.
To make this a true bolt on product, and not just a cheaper bent hanger, we include a laser cut, black anodized custom bracket that moves your MAP sensor and allows for a clean looking install.
Fitment: 99-03 F250-F550 7.3L ; 2000-2003 Excursion 7.3L
219 Reviews Hide Reviews Show Reviews
-
Problem Eliminated
Easy install, made well, and it works. Nice combination Riff Raft. I wish I knew of this device several years ago.
-
OCR Regulator
After modifying my truck I have grown tired of the CEL coming on when I put my foot into it. The computer de-fuels, boost drops and the truck stops pulling. After installing the OCR what a difference! The boost will now hit 27psi and the truck MOVES! No CEL no boost drop and it is a blast to drive. They state it does not enhance performance but it sure feels like it.
-
No CEL light
No check engine light from turbo boost.
-
Looks awesome works great
There wasn’t any instructions for this really but it just took a little to figure it out if you know how the map sensor and all tubing work you can kinda figure it out. I assume you do if you got this product in the first place ! Looks good. Uses factory bolts. Comes with great hoses and the best is. It works ! No CEL !!
-
Full overboost control
This regulator gives me total peace of mind controlling overboost. Easy to install and prevents turbo overpressure. Very useful and effective.
-
seems to work - easy install - looks good
seems to work - easy install - looks good
-
OCR
Great instructions easy to install
-
Overboost code regulator
I installed a new Gen3 Turbo and up pipes, fixed all my boost leaks and only got 26lbs of boost max and threw a check engine light. So I installed the regulator and now I only show 22lbs of boost on my CTS3, but I have a 08 Cluster that shows I am pushing 35lbs+ and it definitely feels like a lot more boost than the 26lbs I was before it, well worth the money. Also did the EBP Isolator pigtail and AIH Plug Code Eliminator. All Engine codes are gone and truck running great.
-
OCR
Fixed my overboost code that was brought on when I installed my Hydra tuner. Quick and easy fix.
