OCR - Overboost Code Regulator™ for Ford 7.3L 99-03
The purpose of the OCR™ is to regulate the presence of an "overboost code" that sets the Service Engine Soon light and stop the PCM from defueling at 23 psi of boost. We are the first to utilize a pre-set custom regulator that will allow your MAP Sensor to see up to 22psi before holding it there. With the use of a pre-set regulator it doesn't allow there to be human error when setting it or to accidently be adjusted out of the correct setting. By using this highly accurate regulator your performance will not be hampered or degraded. You can perform this same mod your self with a compressor regulator from a hardware store, but from experience we have learned that these models can be extemely inaccurate at low psi levels. Because of the inaccuracy and inability to hold the pressure at the same psi you end up adjusting it down there by losing performance. Our OCR™ was made to prevent overboost, but it doesn't enhance performance, it allows the computer to perform past what would normally be an overboost condition. If you aren't building over 23+ and experiencing defueling then this product isn't what you are looking for.
To make this a true bolt on product, and not just a cheaper bent hanger, we include a laser cut, black anodized custom bracket that moves your MAP sensor and allows for a clean looking install.
Fitment: 99-03 F250-F550 7.3L ; 2000-2003 Excursion 7.3L
223 Reviews Hide Reviews Show Reviews
-
Perfect
Perfect
Perfect
Perfect . -
Works perfectly
Works exactly as advertised and took about five minutes to install. I did have to trim the hoses just a little bit to make it look the way I wanted it to. No more check engine light and lost power from the overboost code with my tuner and injectors. It looks great, mounts easily, and works. My only “complaint” is that the hose routing could be a little bit cleaner, maybe with a 90 degree fitting on one side? A looped vacuum hose looks a little bit hokey, but maybe I’m just being too picky. I would definitely buy it again. Good product.
-
OCR - OVERBOOST CODE REGULATOR™ 99-03
After some upgrades, my turbo was producing 32 pounds of boost causing all kinds of drama with the pcm. This simple regulator solved all my issues and now the truck runs better than ever.
-
Shipped very quickly...
As it always does from Riffraff. Easy installation. 15 min job. Great quality parts and mounting bracket makes for a clean quality look under the hood. A+
-
Awesome Customer Service
Great product, fast shipping. Had a question on install, they helped me and I was all done in under 5 mins.
-
Great product
Works like it’s supposed to. I really like how this used the original bolt holes and looks like it is stock piece of equipment. Very easy to install and took 10 minutes at the most.
-
No More Flashing CEL!!!
Shipped fast, packaged well. Install was easy and clean!!! No more flashing CEL when staying in the throttle with upgraded compressor wheel and Hydra installed. The bracket with map sensor relocation made for effortless- clean installation.
-
OCR - OVERBOOST CODE REGULATOR™ 99-03
This product looked, fit and worked amazing. The new bracket that relocates the map sensor fit perfect and looks almost factory. No more over boost check engine light issues. I would definitely recommend this product to anyone running more boost through their 7.3 and having over boost check engine light problems.
-
Works great!
I rebuilt and upgraded my turbo, while doing so I caused my check engine light to come on every time I worked my truck. I put the regulator on it and never seen the engine light again. I like the way it mounted also. Great Product!
