OCR - Overboost Code Regulator™ 99-03

Part Number:
RDPOCR

Manufacturer:

$128.61
$112.87
(You save $15.74 )

OCR - Overboost Code Regulator™ for Ford 7.3L 99-03

The purpose of the OCR™ is to regulate the presence of an "overboost code" that sets the Service Engine Soon light and stop the PCM from defueling at 23 psi of boost.  We are the first to utilize a pre-set custom regulator that will allow your MAP Sensor to see up to 22psi before holding it there.  With the use of a pre-set regulator it doesn't allow there to be human error when setting it or to accidently be adjusted out of the correct setting.  By using this highly accurate regulator your performance will not be hampered or degraded.  You can perform this same mod your self with a compressor regulator from a hardware store, but from experience we have learned that these models can be extemely inaccurate at low psi levels.  Because of the inaccuracy and inability to hold the pressure at the same psi you end up adjusting it down there by losing performance. Our OCR™ was made to prevent overboost, but it doesn't enhance performance, it allows the computer to perform past what would normally be an overboost condition. If you aren't building over 23+ and experiencing defueling then this product isn't what you are looking for.

To make this a true bolt on product, and not just a cheaper bent hanger, we include a laser cut, black anodized custom bracket that moves your MAP sensor and allows for a clean looking install.

Fitment: 99-03 F250-F550 7.3L ; 2000-2003 Excursion 7.3L

install.jpg

Write a Review

221 Reviews Hide Reviews Show Reviews

  • 5
    Game changer

    Posted by Bishop on Mar 26th 2026

    This was a game changer. With the turbo pedestal delete and the upgraded waste gate valve. This eliminated my ruff idling problem. The new bracket puts the map sensor in a better location

  • 5
    Better than expected

    Posted by Kevin Solgat on Mar 25th 2026

    Really awesome small and neat. I was expecting a bulky valve but its small. Only wish it came with hose clamps for the ends that connect to the manifold fitting and boost part.

  • 5
    Problem Eliminated

    Posted by CHARLES on Feb 3rd 2026

    Easy install, made well, and it works. Nice combination Riff Raft. I wish I knew of this device several years ago.

  • 5
    OCR Regulator

    Posted by David on Feb 2nd 2026

    After modifying my truck I have grown tired of the CEL coming on when I put my foot into it. The computer de-fuels, boost drops and the truck stops pulling. After installing the OCR what a difference! The boost will now hit 27psi and the truck MOVES! No CEL no boost drop and it is a blast to drive. They state it does not enhance performance but it sure feels like it.

  • 5
    No CEL light

    Posted by DK Mader on Jan 27th 2026

    No check engine light from turbo boost.

  • 5
    Looks awesome works great

    Posted by William Garing on Oct 5th 2025

    There wasn’t any instructions for this really but it just took a little to figure it out if you know how the map sensor and all tubing work you can kinda figure it out. I assume you do if you got this product in the first place ! Looks good. Uses factory bolts. Comes with great hoses and the best is. It works ! No CEL !!

  • 5
    Full overboost control

    Posted by Monica Rey on Sep 25th 2025

    This regulator gives me total peace of mind controlling overboost. Easy to install and prevents turbo overpressure. Very useful and effective.

  • 4
    seems to work - easy install - looks good

    Posted by 5th wheel RV truck on Sep 23rd 2025

    seems to work - easy install - looks good

  • 5
    OCR

    Posted by RANDY ANGULO on May 5th 2025

    Great instructions easy to install