Intercooler Boot Complete Clamp Kit 6.0L

Part Number:



Intercooler boot complete clamp kit for Ford 03-07 6.0L Powerstroke.  


Hot Side: 2 - 2.75", 1 - 3.25", 1 - 3.5"
Cold Side: 4 - 3.25"

Made In The USA

Write a Review

20 Reviews Hide Reviews Show Reviews

  • 3
    Clamp Torque

    Posted by Richard A> Goins on Oct 24th 2019

    When tightening to Riff Raff specified torques. some of the nuts appeared to tighten down on to the non-threaded portion of the assembly. Believe I carefully selected the correct clamp for the correct location. Also the clamps did not appear any better than the OEM. Time will tell if they hold up, the CAC boots did look like a improvement, again time will tell.

  • 5
    Work well

    Posted by Skinz on Oct 23rd 2019

    These are good clamps that work well

  • 4
    Turbo boot clamps

    Posted by Mark on May 13th 2019

    Received the clamps quick, sizes were perfect. Quality is as good or better than OEM. Very pleased!

  • 5

    Posted by Bill on Mar 26th 2019

    Great replacements for stock. Well made. Right sizes

  • 5
    Great replacement clamps

    Posted by Unknown on Oct 22nd 2018

    Must have if you get the boot kit simple installation

  • 5
    No other clamp compares.

    Posted by Corey on Sep 21st 2018

    I made a mistake a few years back and bought a set of tubes, boots, and clamps that were a sinister knockoff. I run Looney Wild and UltimateX tunes for daily drivers and routinely see boost numbers in excess of 35psi which isn't insane, but more than stock nonetheless. Nothing is more fun than blowing a boot off at 70mph on the highway while running late to drop my daughter off at school. I've done this numerous times and finally had enough. Couldnt afford to buy new boots and clamps so opted for this clamp kit. These are amazing and tough as hell. I installed them and have HAMMERED on my truck everytime I drive it trying to blow them off and they just straight up dont move. I cant wait to buy the RiffRaff boots. I would buy these again in a heartbeat. Amazing price, always amazing customer service and insanely fast shipping. Dont buy anywhere else.

  • 5
    2004 F350 Joe in San Diego

    Posted by Unknown on Jun 7th 2018

    Ordered this set with my cac boots.quality clamps fit perfect. Fast shipping.

  • 5
    Don't reuse your oem clamps, buy these if you buy new boots

    Posted by Brent on Aug 29th 2017

    I tried for a long time using the factory clamps. They were just old. I got new hot side boots and hot side clamps. Maybe other folks have had luck with other clamps but I feel not just any old clamp will do. These are good quality clamps and hold everything on well. I feel they will be on there for a long time to come.

  • 5
    Might as well

    Posted by Caleb on Aug 2nd 2017

    Dont skimp on this after buying the boots. Look and feel like they will hold up well but again have yet to use one of the clamps. Spare clamps for now.