Fuel Line SS Braided Hose Kit - 7.3L 99-03

Part Number:
RDP-FFL-SD

Manufacturer:

$108.66
$108.66
$89.26
(You save $19.40 )

Riffraff Diesel Fuel Line SS Braided Hose Kit - 7.3L 99-03

Our new feed line kit utilizes Eaton Aeroquip® 304 Stainless Steel Braided lines covered with a groundbreaking protective layer of HYTREL® from DuPont to replace your worn and restrictive OEM hard lines that run from the fuel bowl to the driver and passenger side heads. 

Our SS Braided Fuel Line Kit also solves the issue of pedestal interference on the OEM passenger side metal hardline when you convert to a T4 Turbo kit. This kit covers the fuel lines from your 1999-2003 7.3L Fuel Bowl to the fuel rail in the cylinder heads. 

Made in the USA

Installation Note - Do Not over-tighten the 90º elbow that is installed into the fuel bowl. It is a tapered thread, and if over tightened can crack the fuel bowl.

install.jpg

Write a Review

24 Reviews Hide Reviews Show Reviews

  • 5
    Fuel line

    Posted by john j cause on Oct 23rd 2020

    The new hoses are far better then stock and will flow better with less restriction.

  • 5
    Nice Kit

    Posted by Thomas Evans on Oct 11th 2020

    Good idea, innovative solution to the factory lines that leak.

  • 5
    A very good product exactly what they showed online

    Posted by Adrian Tadlock on Aug 24th 2020

    East to install

  • 4
    Quality line kit

    Posted by James on Aug 12th 2020

    Install was a 2/5 just takes a little time to fit my fat hands in for the head adapters. Nice quality lines, nice stainless hardware. Recommended over the restrictive stock tube for sure.

  • 3
    SS fuel line kit

    Posted by William on Aug 10th 2020

    Really good product with great quality parts. The only trouble I had was that I couldn’t find the instructions to install the parts. Tip is you can take a couple of extensions with 13mm or 9/16 deep socket go behind the turbo remove the old fittings from the passenger head and tighten the new fitting when installed can’t remember if the new fittings are the same socket size as the old fitting. To tighten the passenger fuel line I used a slightly Bent 9/16 combination wrench with the down pipe installed it’s a tight squeeze but made it work. a stubby 9/16 would be best but didn’t have one on hand.

  • 4
    Fuel line kit

    Posted by William on Aug 10th 2020

    Really good product with great quality parts. The only trouble I had was that I couldn’t find the instructions for the install. Tip is that you can take a couple extensions with I believe a 9/16 or 13mm deep socket go behind the turbo to the rear Passenger head to remove the old fitting and tighten the new fitting when installed. A slightly bent 9/16 combination wrench helped with the install of the fuel line on the passenger side with the down pipe installed.

  • 5
    fuel line ss braided hose kit

    Posted by steve fleming on Aug 10th 2020

    good quality hoses

  • 4
    Good fit n built to last

    Posted by Brandon on Jul 27th 2020

    Awesome product. Made in the USA!!!



  • 5
    While you're in there......

    Posted by Rich on Jul 26th 2020

    I have a 1999.5 and I installed the Fuel Rail Crossover FRx, High Flow Banjo Bolt, SS Braided Fuel Hoses and the HPOP crossover all at the same time. Wow what an improvement. I feel better low end power and the engine is so much quieter that before the install. I should have done this a long time ago. While you're in there, add the poppet rebuild kit and put a fuel pressure gauge on the list also.