Fuel Bowl Heater Element 99-03 7.3L Powerstroke
Genuine Ford Navistar Fuel Bowl Heater element packaged with 2 new stainless steel hold down screws.
Not aftermarket, OEM manufactured by International.
Contains diagram of heater placement in fuel bowl. For further instructions on removal and installation, refer to the heater section of the fuel bowl rebuild instructions: PDF file to rebuilding your entire fuel bowl.
99-01 Ford Powerstroke: Is you underhood #30 30amp fuse blown, no WTS dash indicater lamp? Chances are you old style heating element has shorted out and taken the fuse with it. This 30 amp fuse also powers the ECM and the truck will not start without it. You can temporarly get by with unplugging the electrical connector from the fuel bowl and replace the 30amp fuse until your new heating element arrives.
Write a Review
33 Reviews Hide Reviews Show Reviews
-
Better design than the original
My heater was shorting to the fuel bowl and causing some issues with the PCM. Looks like this must have been fairly common because ford changed their design for this one. Great OEM part with a better design than the original.
-
BUILT TO LAST
WELL MADE,EASY INSTALL
-
Easy Install
Easy install.Better design than original. Time will tell how long it will last. Don't expect any problems.
-
Fuel bowl heater
Perfect fit easy install and great service as always from Riff RAFF
-
Much Better Product Than The Original!
This heater element is a much better design than the one that came from the factory in my early 1999 7.3 Powerstroke. If you have one of the old welded kind that has come loose or the welds have broken, then you need one of these to replace it!
-
A Must Have!
Good item, easy to install
