FPR Replacement Housing - Billet Aluminum 99-03 7.3L
100% MADE IN THE USA!
- 58-61 psi silver spring (Stock pressure)
- 62-65 psi gold spring
- 67-70 psi black spring
Please Note: The fuel compression sleeve that seals the return hard line to the FPR housing is NOT reusable. The old sleeve will come out in at least 2 pieces, if not so dried up and cracked that you will have to remove the pieces with a pick tool. If you attempt to re-use a compression sleeve after it has been in service a few thousand miles, it will leak. Order a new Parker compression fuel sleeve from the bottom of this page as a related item. | |
*Note: Fuel pressure data was gathered by using a analog mechanical guage on a test bench using a 2001 fuel bowl with no fuel filter and a Walbro GSL-392 fuel pump. The housing was then moved to live testing on a 2002 7.3L F350 and using multiple springs, a digital fuel pressure gauge rated at 1/2 of 1% accuracy and a stock Ford Bosch fuel pump, identical data was collected. Due to accuracy tolerances of various pressure gauges and spring tensions from the manufacturing process, your pressure readings could have variances from these results. |
17 Reviews Hide Reviews Show Reviews
-
Personal review
The shipping was unexpectedly fast, and the packaging was great. It was tricky to get in but I didn't remove my alternator bracket for the fuel lines to move freely, but it looks a lot nicer than the old FPR Housing and I'm greatly satisfied with the product I will continue shop on riffraff!
-
Billet FPR housing
Quality piece, easy install
-
FPR billet aluminum housing kit w/ springs
The kit I purchased is great. I just haven’t had the time or the weather to cooperate with getting it installed. Is it possible to return the other standard FGR fitting I purchased? I don’t think I need it now. You crew ROCKS!!!
-
Fuel pressure regulator housing
If you are considering replacing your fuel pressure regulator spring go ahead and buy this kit.
-
FPR HOUSING - BILLET ALUMINUM W/ PRESSURE SHIM SPRINGS
If you're working on your Fuel Bowl or thinking about replacing your FPR springs do yourself a favor and buy this kit, the factory housing is very brittle and will likely leak even if you manage to not break off the threaded portion, this part is far better and stronger than the factory part, plus it comes with a choice of springs. It's also an easy replacement even if the Fuel Bowl is installed.
-
For housing
Love to fast shipment the product looks great. I put the gold spring in hoping to get a little more pressure was running at 60 psi how I am only running 61 to 62 the spring I put in said it would be around 65.
-
MUST HAVE
Do yourself a favor if you are doing anything with the inlet side of the fuel bowl or the lines there just get this first it's well worth the money and will save a you ALOT of time and stress seeing as the original OEM part just loves to break which in the end will cost you more money than this.
-
Very well made.
The old cast aluminum regulator cap broke off into the hard fuel line. It took 3 days to get the new part and was super easy to install. As far as a superior product I don’t think riffraff can be matched.
-
fpr housing and springs
best damn 46 bucks I've spent in a long time.