Exhaust Back Pressure Tube EBP 99-03
This stainless steel tube runs between the passenger's exhaust manifod and the EBP Sensor mounted on the front of the HPOP reservouir. WIth age the tube will plug with soot and can rust or break apart. The EBP sensor system feeds data to the PCM which effects many of the fueling tables within the PCM and should be kept in good working order to acheive your best fuel economy.
Fitment:
1999 to 2003 Powerstrokes - Excursion, E or F series
79 Reviews Hide Reviews Show Reviews
-
EXHAUST BACK PRESSURE TUBE EBP 99-03
Riffraff had what I needed, shipped part about 5 mins after sending order. arrived early, well pack, and the right part first time.
-
OEM
Came on OEM Ford packaging. Fit like a glove on my 01 F250 7.3 If you are ordering it I advise you to go out and spray both ends with WD-40 that way when it’s time to crack those nuts loose it isn’t a battle. I believe it was a 5/8” wrench had to use a stubby up top or move the fan/shroud out of your way.
-
exhaust back pressure tube
Excellent Ford OEM part. perfect fit.
Shipping was very fast -
Tube
I highly recommend riffraff, I have ordered several times, but this tube was Just a little too short. Could not use it.
-
Perfect fit
Needed a new line bad and who else would have one but Clay.
-
Great Quality
Great OEM quality. Perfect fit on my Early 99.
-
Oil rail equalizer
This install works well. Idles much better than before. Runs very smoothly also. Just follow the directions and all will end well.
-
back pressure tube
tube is better material than OEM.
-
Ebs tube
Fits perfectly. If you have dual alternators, you’ll have to remove the belt, then remove the tensioner, then remove the three bolts that hold the lower alternate bracket in. You can let the bracket with alternator attached hang while you replace the tube.
