Complete CAC Intercooler Boot Kit Ford 7.3L Powerstroke 99-03
This complete kit consists of 6 pieces of 4-ply Aramid reinforced silicone hoses that are specially made for Riffraff Diesel to withstand extreme temperatures to approximately 500 degrees F (vs. standard couplers that are good to 350 degrees F) and have been tested up to 150 psi working pressure.
Available in Blue, Red, and Black.
You will need to measure the inlet and outlet size of your intercooler to know what you have. We do not make a universal boot that fit both because fitment should be snug. Your metal intercooler tubes are 3" on all years so you don't even need a tape measure, just take off the boot, flip it around and see if it will fit on the inlet/outlet of the intercooler. If you need help with sizing please give us a call to ensure you get what you need.
We offer Early 99 plenum boots as well. These can be identified by the small 2" plenum inlet where the 99.5-03 have a 3" plenum intake and the truck production date would be 12/7/98 or before. If you need help with sizing please give us a call to ensure you get what you need. We also offer clamp kits if you are still running your stock Ford clamps.
Riffraff CAC / Intercooler Boot Measuring
325 Reviews Hide Reviews Show Reviews
-
Quality product
Really seem like a set at a reasonable price
-
Nice fit and looks great!
I replaced my factory boots with these from Clay and they were a nice tight fit and look great. Pushing 35 lbs boost and held up and have not blown off like OEM boots.
-
excellent quality
much better than oem, its just to bad you cant see them.
-
Very good, high quality
Nice fit. Thicker walls. Better than OEM.
-
great product good price
They fit nice an snug. Firm material unlike rubber stockers. They are thicker than stock ones so the stock clamps are a little difficult to put on but I just took the nuts off to get them in place and then put them back on and tightened them down
-
quality outstanding
much better than ford's original
-
Great Boots
These boots are great. Very durable. Easy to install. Well worth the money than buying new OEM boots from Ford
-
Excellent kit parts fit well
Fast shipping great kit. All of the boots fit well and the instructions were easy to follow. I would recommend a pressure washing before doing the lower intake manifold boots though, it gets grimy down there.
-
Replace your boots !
While it's apart you might as well replace these. These boots are much sturdier than the stock ones and much better looking!
