OBS 7.3L Powerstroke Intercooling: What It Is and Why It Matters
Nov 13th 2026
Quick Answer
The 1994.5-1997 OBS 7.3L Powerstroke came from Ford without an intercooler.
That means the hot, compressed air leaving the turbo goes straight to the engine. An intercooler cools that air first, giving the engine a denser intake charge and helping performance, efficiency and allows for better control of EGT.
For an OBS that tows, runs larger injectors, or has added fuel and boost, that's a big upgrade.
What Does an Intercooler Do?
Turbochargers compress air, and compressed air gets hot. Hotter air is less dense, which means less oxygen in the same volume. An intercooler acts like a radiator for the turbo's charge air, removing heat before that air reaches the engine. Intercooling is the most effective way of cooling intake air.
Cooling that air helps:
- Lower intake-air temperature
- Increase charge-air density
- Reduce EGT under load
- Improve thermal margin while towing
- Support larger injectors, tuning, and turbo upgrades

The Banks Techni-Cooler System
The Banks Techni-Cooler, part number 25970, was designed specifically for the 1994-1997 F-250 and F-350 7.3L Powerstroke.
It includes more than just an intercooler core:
Banks Techni-Cooler
- 3-inch mandrel-bent boost tubes
- Banks Twin-Ram intake manifold
- Boots, clamps, brackets, and hardware
- Banks uses all-aluminum end tanks and a large intercooler core designed to remove heat without creating excessive restriction.
Riffraff carries the complete system here:
Banks Techni-Cooler Intercooler System: https://www.riffraffdiesel.com/banks-techni-cooler-intercooler-system/
Why the Twin-Ram Matters
The Banks system also replaces the factory intake connection with its Twin-Ram manifold. The idea is to improve how charge air is split between the two cylinder banks while also increasing overall airflow. So you're not just adding an intercooler. You're improving the intake path from the cooler all the way into the engine.
The Big Benefit: Lower EGT
This is where intercooling really pays off. The harder you work a 7.3L, the more heat you're trying to manage. Add fuel through larger injectors or tuning, then tow a trailer up a long grade, and EGT can climb quickly. Banks has reported 100 to 150°F reductions in EGT after installing the Techni-Cooler on an OBS 7.3L. Think of it as more thermal stamina. You're able to use the entire power producing potential of the engine longer, before EGT forces you to pull back.
Banks Techni-Cooler Facts
A few hard numbers:
- Fitment: 1994-1997 Ford F-250/F-350 7.3L Powerstroke
- Banks part number: 25970
- Boost tubes: 3-inch mandrel-bent
- End tanks: All aluminum
- Intake: Banks Twin-Ram
- Flow volume: Banks lists an 18% increase compared with the 1999-2003 7.3L intercooler
- Installation time: Banks lists approximately 10 hours
- Warranty: 2 years
- Emissions: CARB EO D-161-82
Note: That 18% figure is compared with the later 1999-2003 7.3L factory intercooler, since the OBS didn't have one to compare against.

Is It Only for Modified Trucks?
No. A stock OBS can still benefit, especially if it tows. But the more fuel and boost you add, the more important intercooling becomes.
It's especially useful with:
- Larger injectors
- Performance tuning
- Turbo upgrades
- Heavy towing
- Long hill climbs
More fuel makes more heat. Intercooling helps keep that heat under control.
What About Boost Pressure?
An intercooler can create some pressure drop. But that doesn't mean you've lost performance. Boost pressure is only part of the picture. Cooler air can be denser even at slightly lower pressure, which means you're still getting more usable oxygen into the engine.
The goal isn't the biggest boost number. It's a cooler, denser air charge reaching the cylinders.

Installation
This isn't a 30-minute bolt-on. The intercooler mounts in front of the radiator, and the 3-inch piping needs room through the OBS core-support area.
The upside is that the Banks kit is designed as a complete OBS system rather than piecing together later Super Duty parts, custom piping, and brackets.
The Bottom Line
The OBS 7.3L has one obvious disadvantage compared with the later Super Duty. Ford didn't intercool it.
The Banks Techni-Cooler fixes that with a purpose-built intercooler, 3-inch boost tubes, and Twin-Ram intake.
For a stock rig, it adds thermal stamina. For a truck with larger injectors, tuning, or a turbo upgrade, it becomes even more important.
More fuel needs more air, and cooler air is better air.
Related Articles
Cooler EGTs, More Power: A Guide to Intercooling the 1994-1997 Powerstroke
Diesel World Magazine install and test of the Banks Techni-Cooler System, and More
https://www.dieselworldmag.com/ford/project-obsessed-2/
Banks Testing Results (from Banks direct)
https://shop-banks.s3.amazonaws.com/literature/96479_v5_Ford_9403_AppCat.pdf
Banks Installation Guide (from Banks direct)
https://banks-assets.s3.amazonaws.com/sdc/manual/96322_v9.pdf
***Disclaimer: The information provided on this blog is for informational purposes only. We share our knowledge and experience, but we are not liable for any damages, injuries, or losses that may occur as a result of using this information. Situations are rarely cut and dry in the automotive world. Your situation will likely be somewhat different than what we describe here. Use your best judgment and always consult a qualified professional for automotive repairs and modifications. Your safety is your responsibility.






