Riffraff Diesel 7.3L Powerstroke Injector Cup / Sleeve Tool Set 94-03
Brand New Patented Design!
We have refined our injector cup/sleeve tools over the last 12 years, using them ourselves and as rental units, and we have now been awarded patents on their design and released them to production. These tools were designed for 7.3L gearheads by 7.3L gearheads.
Unlike our competitors’ cup tools, our design is engineered for efficient, repeated shop use removing and installing the injector cups. We believe removing and installing the injector cups should be a more surgical operation, not something requiring beating cups in with hammers and leaving brass filings from the removal process behind. Thus we have designed our tools with tight tolerances and clean injector bores in mind.
Since we utilize the latest in metallurgical and coating technology it allows us to thread our removal tool into the damaged injector cup without creating any filings or chips to fall into your cylinders. Both our puller and installation tool use bridges that are quickly fastened to the injector mounting holes, eliminating the need to remove your rocker arms and allowing for a faster overall job.
Our Patented install tool is really the breakthrough; rather than hammering on your new cups in tight spaces and hoping they are seated, simply use a socket and allow the tool to press the cup in. The tool allows for a completely seated cup every time; no guessing and no hammering, even on the back cylinders or e-series vans. To ensure our install tool doesn't deform your new cup as our competitors’ tools do, it is machined to engage both the full surface of the cup bottom and the top lip. The tool also features an o-ring as a keeper to allow strategic placement of the cup in the injector bore instead of dropping it in and risking displacement of your sealant. In order to allow the cup to seat without turning in the head, the install tool is engineered to include a ball bearing to prevent cup rotation while being pressed in. All hardware has been coated for rust resistance as well as to achieve a Rockwell hardness of over 62 to ensure a long life.
Features:
- 100% Manufactured and Assembled in the USA
- Made from 7075 Anodized Aluminum and Coated Grade 12.9 hardware
- Serviceable parts (if required)
- Patented Design
- "No Chip" Puller Design
- "No Impact" Installer Design
- Works on all F-Series as well as E-Series without removing heads
- Designed to work with headbolts as well as headstuds
- Includes mounting hardware 
*If you are looking to rent instead of purchase look under the injector cup for the optional rental
190 Reviews Hide Reviews Show Reviews
-
Tool for the weekend warrior or a pro
Set is top notch. I appreciate all the detail that went into this product. The tool dedicated hard case is so official. This tool pays for itself in the first use, even if you use it once. It is important to support shops that create products in USA. Thank You.
-
easiest to use
very easy to use in removing and installing cups easier than trying to pry cups out and hammer cups back in would like to see extra orings and bolts like what hold the injector in instead of the allen head type
-
Experienced techs design the best tools................
The design of this tool is perfect I have been a diesel tech for 25 years and this tool has the tech in mind.... the tool works like a dream. It does the job just like it says it will!! The guys who designed it knew what us{the tech} wanted in a tool. The big car companies need to follow suit here and start asking techs about tool design. You guys nailed this one dead on!!!!!!!!!!!!!!! thank you so much!!!!!!
-
An excellent tool.
I recently purchased this tool for installing the cups in my two 2001 f250 pickups. Not only is this tool simple in design it is effective and very easy to use. It beats the heck out of pulling the cab or heads to do the injector cup installation. The only thing in would have as a recommendation is that riff Raff diesel would come out with a wire brush set specifically for cleaning the cup mounting surfaces. Outside of that I am thoroughly impressed with both the tool set and with riff Raff diesel's customer service. Special thanks to clay, he was an excellent example of good customer service and very helpful. I look forward to doing business with riff Raff diesel in the future.
-
a must have
This tool was very easy to use. I have used other manufacturer's tools for this type of job and this one blows them away!!! The case is nice for storage and organization. Having the correct instructions right with it is very handy.
-
Great Tool!
Tool is well made and easy to use on all cylinders. Highly recommended
-
BEST TOOL OUT THERE!!!!!
By far one of the easiest tools too use. The engineering of what looks to be sealed bearings on the tooling ends makes for a super smooth operation and you can basically hand tighten the main bolt down to snug it then use a ratchet to finish the rest of the operation. Which makes for an easier job when working on the back #7 and #8 injector cups as it's a bit more tricky to get all the way back there. Also the extractor tool in my opinion is a much better design then the tools that use a tap to thread into the old cup. This tool creates no thread shavings that could possibly drop into the cylinder and manages to grab the cup with no chances of slipping. It's a win win. was gonna rent the tool at first but quickly decided to just buy it. It's by far the best design for the job. The other hammer type injector cup tools don't even compete close compared to this tool. Was a great edition to my already full tool box.
-
Nice tool
I was very pleased with how this tool worked, great design
-
Finally something good about the 7.3 injector cups
Fastest and easiest way I have ever done this job!
