Riffraff Diesel 7.3L Powerstroke Injector Cup / Sleeve Tool Set 94-03
Brand New Patented Design!
We have refined our injector cup/sleeve tools over the last 12 years, using them ourselves and as rental units, and we have now been awarded patents on their design and released them to production. These tools were designed for 7.3L gearheads by 7.3L gearheads.
Unlike our competitors’ cup tools, our design is engineered for efficient, repeated shop use removing and installing the injector cups. We believe removing and installing the injector cups should be a more surgical operation, not something requiring beating cups in with hammers and leaving brass filings from the removal process behind. Thus we have designed our tools with tight tolerances and clean injector bores in mind.
Since we utilize the latest in metallurgical and coating technology it allows us to thread our removal tool into the damaged injector cup without creating any filings or chips to fall into your cylinders. Both our puller and installation tool use bridges that are quickly fastened to the injector mounting holes, eliminating the need to remove your rocker arms and allowing for a faster overall job.
Our Patented install tool is really the breakthrough; rather than hammering on your new cups in tight spaces and hoping they are seated, simply use a socket and allow the tool to press the cup in. The tool allows for a completely seated cup every time; no guessing and no hammering, even on the back cylinders or e-series vans. To ensure our install tool doesn't deform your new cup as our competitors’ tools do, it is machined to engage both the full surface of the cup bottom and the top lip. The tool also features an o-ring as a keeper to allow strategic placement of the cup in the injector bore instead of dropping it in and risking displacement of your sealant. In order to allow the cup to seat without turning in the head, the install tool is engineered to include a ball bearing to prevent cup rotation while being pressed in. All hardware has been coated for rust resistance as well as to achieve a Rockwell hardness of over 62 to ensure a long life.
Features:
- 100% Manufactured and Assembled in the USA
- Made from 7075 Anodized Aluminum and Coated Grade 12.9 hardware
- Serviceable parts (if required)
- Patented Design
- "No Chip" Puller Design
- "No Impact" Installer Design
- Works on all F-Series as well as E-Series without removing heads
- Designed to work with headbolts as well as headstuds
- Includes mounting hardware 
*If you are looking to rent instead of purchase look under the injector cup for the optional rental
195 Reviews Hide Reviews Show Reviews
-
Riffraff Diesel 7.3L Injector Cup / Sleeve Tool Set
I've been a tech for 26 years, 22 spent in the dealership. This might be the best working special tool I've ever used!
-
Cup tool
Very good product would recommend it to any one who is working on putting cup in a 7.3
-
Great Design
This tool removed cups that were installed with RED Loctite. Highly recommend this tool !!!!!
-
7.3 injector cup tool
Tool works as it should, quality tool
Needs a hardened washer or bearing between the steel nut and the aluminum cross bar for the removal tool, I cleaned and oiled the threads and nut after each cup removal and still had aluminum particals from the nut cutting into the aluminum. I did chamfer the outside diameter of the flange nut ever so slightly to remove the sharp edge, it helped some -
Great quality product
This tool set made it a breeze to remove the old busted cups and install the new ones I purchased from Riffraff. The removal tool took the cup out, it took 7 quarter turns roughly in each cup. The instructions on their website make it too easy to use both tools. Highly recommend to any that find themselves having to replace their injector cups.
-
Awesome!
I am a tech and a shop owner. This tool works great. I used it for the #6 and #8 injector cups. Saves so much time, no need to remove the rocker arms or cylinder head. Easy to use, even on the #8 cup right against the firewall. Must have tool for a diesel tech.
-
injector cup/sleeve tool remover/installer
This tool is well made & makes injector cup removal & install easy & precise.
-
Exelent design
I was very impressed with the tool when it arrived and it preformed flawlessly. Removed the cups with out a lot of shavings And mess. The instalation tool worked well to it installed them firmly and fully seated. No messing with a hammer to beat them in. I did the cups with the heads on and the motor in the truck and had no clearance problems. Well done riff raff
-
Ford Tech Must Have!
I have been using the worthless OTC Ford tool for over 6 years now. Your guys tool is saving my customers literally thousands of dollars on every job now with this awesome tool. You can tell right away using this tool you guys have done your share of cup jobs and know the waste of having to remove the head. If there is one must have tool for a Ford mechanic it is this one! Save your self hours on every job - Buy it now!
