Air Intake Heater Plug Code Eliminator for Ford 7.3L 99.5-03
- Code P0541 is detected and logged during a diagnostics scan of specific sensors by the PCM at start, when the Air Intake Heater plug is disconnected.
- The harness, used in conjunction with the AIH plug will stop the PCM from throwing the P0541 code "Intake Air Heater Relay 1 Low".
- More than just a wire!
- Easy to install.
- Use it when you remove the AIH.
- Built for exact fit.
ALL YOU NEED TO DO IS REMOVE THE EXISTING WIRE FROM THE SOLENOID, THEN HOOK UP THIS WIRE AND RUN THE OTHER END TO GROUND.
121 Reviews Hide Reviews Show Reviews
-
AIH delete code eliminator
easy install....
-
It’s one wire
One wire. Too easy. Will never know if it works because it’s never cold enough here. Seems good
-
Super easy install and no codes
Just put this in where your AIH wire connected to the solenoid/relay, attached the other end to an engine ground, and bingo your done. Very nice that Riffraff has all these parts to do the AIH delete and you don’t have to look around for other parts to make it work.
-
Great product well made
Great customer service
-
Code eliminator
Simple, sleek, effective.
-
Ford 7.3L AIH wire
Made code go away
-
Great product
Great product
-
Code be Gone!
Works! quick install and that pesty AIH code is gone!
-
AIH Delete Plug Code Eliminator Harness
Installed this little gem when installing the AIH delete plug. Easily attached on the solenoid and I curved it around to ground on the Glow Plug Relay mounting bolt. This is a MUST HAVE with the AIH plug to avoid a MIL.
