Stainless Steel T-Bolt Boot Clamps

Part Number:



Stainless Steel T-Bolt Boot Clamps 

6.4L Clamp Sizes - 08-10

Turbo Boot - 3.25"/3.25"
Driver Side I/C Boot - 3.25"/3.5"
Passenger Side I/C Boot - 3.25"/3.25"
Passenger Side Intake Elbow - 3.25"/3.25"

6.0L Clamp Sizes - 03-07

Turbo Boot - 2.75"/2.75"
Passenger Side I/C Boot - 3.25"/3.5"
Driver Side I/C Boot - 3.25"/3.25"
Driver Side Intake Elbow - 3.25"/3.25" 

7.3L Clamp Sizes - 99-03

Plenum Boots 99.5-03 - 3.25"/3.25"
Early 99 Plenum Boots - 2.25"/2.50"
Upper Intake Manifold Spider - 3.25"/3.25"
I/C Boots Option 1 - 3.25"/3.25"
I/C Boots Option 2 - 3.25"/3.5"

7.3L Clamp Sizes - 94-97

Turbo Intake Boot - 3.25"/3.50"
OBS Plenum Boots - 2.25"/2.25"

Write a Review

70 Reviews Hide Reviews Show Reviews

  • 5

    Posted by Unknown on Aug 12th 2019

    A must if you want to keep those boots tight

  • 5
    Far better than stock!

    Posted by Mike on Jul 16th 2019

    Even if your truck is stock you should get these! You can crank down on them so much more than the stock cheap ones that will break or slip if you tighten them too much. These helped fix my boost leaks, I highly recommend them for these trucks!

  • 5

    Posted by Bob B on Jul 11th 2019

    Used these with RR plenum inserts and was able to crank down on the boots so hard they'll never leak again. Highly recommended.

  • 5
    Great clamps, no issues

    Posted by Michael Cocchiola on Jul 1st 2019

    Work great with riff raff cac boots

  • 5
    Great Products

    Posted by Wheler Magee on Jun 28th 2019

    These work great, don't cost much and I'm very happy with them.

  • 5
    Great clamps!

    Posted by BlueBoostedF250 on Nov 25th 2018

    Between these and the RDP plenum inserts some subtle unknown boost leaks disappeared!

  • 5
    Boot clamps

    Posted by Unknown on Aug 19th 2018

    Good quaility clamps

  • 5
    Great products

    Posted by Unknown on Jun 10th 2018

    Great products

  • 4
    Awesome Clamps to Buy with CAC Boots.

    Posted by 7.3 From Kansas on May 22nd 2018

    Reasonable Price. Great Holding Power. Only reason for 4 star is a 12 point Socket will slide down on the square part of the clamp and not allow you to turn it. I would recommend to use a 6 point socket to keep that from happening.