Stainless Steel HPX 99-03

Part Number:
RDPHHPX

Manufacturer:

$64.13
$59.88
(You save $4.25 )

Stainless Steel HPX for Ford 7.3L 99-03

The Stainless Steel High Pressure Crossover is meant to allow excess oil pressure to flow between both heads allowing for better supply to the injectors. By allowing the oil the flow to the opposite head, the issue of pressure spikes are less. HPx line comes with adapters, ready to install. 

install.jpg

 

USA.png

Early 1999-2003 7.3 Powerstroke Does not fit all T4 style turbos.
Write a Review

447 Reviews Hide Reviews Show Reviews

  • 3
    Leaks

    Posted by Eric on Jul 21st 2021

    Quality felt decent, but the flare was leaking between fitting and crossover tube, so I took it off. Didn’t make any difference on my truck anyway.

  • 5
    seems to work as advertised

    Posted by Unknown on Jul 16th 2021

    truck seems to run quieter. will probably replace hpop with adrenaline one day, which at that point i won't need this item any longer. But for now it works great. Easily installed in about 15-20 minutes.

  • 5
    Hpx crossover on my 00 ford f350

    Posted by Caleb on Jul 11th 2021

    Ive had it on my 00 7.3l for 3 days now and its a great product well built great fit, pretty simple install. I noticed the “7.3 clatter “ isnt as bad, runs smoother . Even talked my dad into getting one for his 01

  • 5
    Crossover Tube

    Posted by Pete on Jun 30th 2021

    First thing I noticed was my 7.3 Econoline idled smoother was much quieter and has slightly better acceleration. Also notice my fuel economy went up about 2 mi per gallon from 17 -19 mpg. The cost of the tube will pay for itself in saved fuel. And installation took about 40 minutes which was very easy.

  • 5
    Hpx

    Posted by Unknown on Jun 7th 2021

    Easy to install. Hopefully it doesn't leak anytime soon

  • 5
    Quality and functionality

    Posted by Shawn on Jun 2nd 2021

    First impressed by the fit up. Tubing bends, length where spot on and quality of material was excellent Trucks idle is noticeably quieter and smoother. Throttle response seems to be improved as well. Once again happy with RiffRaff products.

  • 5
    Must have

    Posted by stangjr on May 28th 2021

    Idle got smoother and a touch quieter.
    Checked my HPOP pressure before and after and it leveled out quite a bit. Before pressure would fluctuate up and down about 80psi. After no more than 5psi which on the scale of 500+ psi at idle thats pretty good.
    Super easy install; took me 10 minutes and didn't have to remove any intake piping.
    Literally used 2 wrenches.

  • 5
    Easy peasy

    Posted by Tyler L on May 19th 2021

    This is a great upgrade. Super easy/ high quality and inexpensive. What more to say.

  • 5
    Great!

    Posted by Michael on May 19th 2021

    Great little modification, could use a print out of torque specs.