Parker 60VLV-4 Viton Sleeves (1/4 inch)

Part Number:
GZ-7-004

Manufacturer:

$5.20

Parker 60VLV-4 Viton Sleeves (1/4 inch)

These 1/4" fuel sleeve seals fit the steel fuel injection lines that connect the fuel lines to the cylinder fuel rails. One seal is required at each fuel rail fitting so 1 package of 2 seals is all that is requied for the engine.

On the 99-03 7.3's, the fuel rail fitting on the passenger's side is a common place to find a fuel leak and will run down the rear of the block and drip on the starter motor. With the 94.5 to 97 engines, both fuel rail connections are at the rear of the cylinder heads and can be problematic.

Model Year 94-03 7.3L diesel.

Color: Black

Genuine Parker Vibra-Lok sleeve

Order of 1 is a set of 2 sleeves.

Write a Review

62 Reviews Hide Reviews Show Reviews

  • 5
    Parker 60VLV-4 Vinton sleeve

    Posted by Scott503 on Mar 8th 2016

    These are needed when working on fuel system, not too expensive, they work

  • 5
    Own fit parts

    Posted by Unknown on Mar 6th 2016

    Had what I needed without breaking the bank. OEM quality parts for obs trucks is getting harder to find. Wish Riff Raff had more obs stuff.

  • 5
    Fuel line repair sleeve

    Posted by Unknown on Mar 3rd 2016

    These are the sleeves where the fuel lines go to the fuel rails. I removed the turbo because 1) I had already let the nut slide down to the fuel pump once and didn't want to fish it out and 2) I needed to remove the 90 degree fitting on the drivers side rail to re-tape it since it was leaking too and 3) it just made things easier. Granted, I already had deleted the EBPV which makes getting the turbo off way easier. Bottom line. These are the correct sleeves and mine were badly deteriorated.

  • 5
    Great product

    Posted by John on Feb 1st 2016

    Both products arrived fast and quality of products were exceptional. Would definitely recommend.

  • 5
    Great product and price!

    Posted by Josh on Jan 27th 2016

    Very nice product and exactly like it is advertised!

  • 5
    Work as expected

    Posted by Rick on Jan 13th 2016

    These sleeves work perfectly. Of course they have to stay on the fuel line. I had one come off and fall to the garage floor. Imagine my surprise when fuel was leaking out the back passenger fitting. Found the sleeve and installed it and all is good.

  • 5
    no leaks

    Posted by Ryan on Oct 21st 2015

    If you're installing the high flow CVD fittings you'll need these to do it right the first time with no leaks!

  • 5
    Great

    Posted by Unknown on Sep 8th 2015

    These are for the two 1/4 passenger side lines. Great no leaks work as they should.

  • 5
    Nice complete kit

    Posted by Unknown on Sep 8th 2015

    The kit comes as a complete set for the truck which is nice.