IPR Injection Pressure Regulator 96-03

Part Number:
PU7Z-9C968-B

Manufacturer:

$476.36
$299.08
(You save $177.28 )

Motorcraft IPR Injection Pressure Regulator 96-03 7.3L

 

Write a Review

132 Reviews Hide Reviews Show Reviews

  • 5
    Was trying to fix my random vehicle dieng problem

    Posted by Unknown on Apr 21st 2016

    This part fixed my problem my truck was dieng on turns so I replaced this and the icp and problem solved

  • 5
    Might as well relace it whilst you are in there

    Posted by Unknown on Feb 24th 2016

    Replaced HPOP, while I was in there thought I'd replace IPR, easy enough to get too, whilst everything is apart

  • 5
    Really excited with fingers crossed

    Posted by Ron Pilcher on Jan 31st 2016

    So this is my third attempt to try and fix my wife's excursions intermittent no start problem. After the simple cam sensor, still problem, then ICP cause harness was shot and wire insulation gone at connector. Thought that got it but after two weeks without a single problem, the call from the wife... My truck won't start. It was a mystery toe I thought I got it that time. Well after a no start again at the church I crawl over the grill and stuck my hand down to the last place that made sense. The IPR. The female plug at the regulator was wriggly and the harness was again shot. So disconnect reconnect wriggle and she started right up. Second no start later I did same thing and it cranked right up again. So I bought the 200 part and the harness repair. Borrow a LONG 30 mm socket from a neighbor and replaced it, taking my time and removing nothing else in about 2 hours in closing the harness. Topped off my hpop reservoir and the beast started right up but sounded lopey like I installed a cam and not an IPR. Quickly got on line while it useless and read you must work the air out of the oil. So 10 min later it was running smoother idling smoother and I swear drove with less effort. I'm very please and hope this no start is whooped. By the way. My old IPR had scarring around the internal end that looked scary and the wiring harness had a loose wire due to heat and oil I guess. Riffraff thankyou for being my go to shop for stuff like this. And I love the packaging tape with the bible verse!

  • 5
    Excellent quality and price!

    Posted by Unknown on Jan 27th 2016

    Clay is always very helpful and it was very easy to find the part I needed as well as the price.. The price was way below any other place and the order was to my place ASAP! Ten thumbs up lol!

  • 5
    Amazing service

    Posted by Unknown on Jan 5th 2016

    As usual, Clay has done it again. My third purchase in 3 months and service has been amazing. Always ships fast and great quality parts.

  • 5
    Works

    Posted by Unknown on Nov 11th 2015

    Changed this out when I replaced my HPOP, appears to work fine. No issues so far. Daily driver with 84 miles per day on truck now from 10/5/15 to 11/11/15.

  • 4
    Seems Like a Quality Part

    Posted by Unknown on Nov 8th 2015

    I bought this product when I replaced my HPOP because my truck had been idling erratically. The part seems to be high quality and a perfect fit, the only thing that I would change is to have more clear instructions for install, I am unsure if I torqued the IPR correctly and I'm hoping it doesn't come back to bite me later. Other than that though, I recommend this product, it is much cheaper than the dealer and fixes uneven idles and no start situations when the truck is hot.

  • 5
    Why worry

    Posted by Richard on Jul 3rd 2015

    Don't bother worrying about your IPR when you change out your hpop. Put this one on and forget about it!

  • 5
    Seemed to do the trick

    Posted by Unknown on Jun 29th 2015

    Great service from Riffraff and a great part! I combined this with the new style pigtail sold here. So far so good. Truck is running smoother.