MBRP 4" Aluminized Turbo-Back w/ Stainless Steel Tip 99-03

Part Number:
S6204AL

Manufacturer:

$667.05
$635.28
$539.99
(You save $127.06 )
UPC:
696555139588

MBRP 4" Aluminized Turbo-Back w/ Stainless Steel Tip 99-03

1999-2003 Ford - Excursion 7.3L
4" Turbo Back, Single Side Exit, AL

KEY FEATURES:
•Mirror polished T304 stainless steel tip 
•Delivers a rich, mellow exhaust note 
•Installs with common hand tools 
•Can improve fuel economy by 1-2 mpg 
•Boosts torque and horsepower 
•Complete Turbo Back System  

The Best Systems Start With the Best Materials 
Built from heavy duty aluminized steel our Installer Series performance exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. Constructed to the same specifications as our top of the line Pro Series we back this line with an industry leading 3 Year Warranty.

Built to Perform 
You count on your truck to tow all of your gear to where you want it. With your MBRPinc performance exhaust you can make that happen with up to 18 HP more horsepower and 28 ft/lb more torque. Give your truck more pulling power and much improved throttle response with an MBRPinc diesel exhaust system. Our systems are so much more efficient, it will be easy to see what your truck can really do.

Minimize Backpressure 
The secret to getting more out of your diesel engine is to give it lots of cool, clean air. The only way that you can get fresh air in is to get the hot air out. From the spiral louvered high flow muffler to the fully mandrel bent tubing to minimal bend degree angles, your MBRPinc performance system gets exhaust out fast. Drop exhaust gas temperature by up to 200ºF and set the stage for all the performance you want. An MBRPinc performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders.

Easy Installation 
MBRPinc systems are as much fun to install as to drive with on your truck. Bolt-on, no weld design makes installing this on your truck a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box, no matter what configuration of truck you have.

Sound & Style 
Performance is one thing but at MBRPinc we believe that appearance and sound is just as important. Every MBRPinc performance exhaust system has been specifically tuned to get the optimal sound from your pickup. With our MBRPinc brand etched on the tips and our unmistakable styling, there's no question that you have the hottest exhaust on the road - MBRPinc.

instructions.png

Write a Review

5 Reviews Hide Reviews Show Reviews

  • 5
    Very Nice kit highly recommended

    Posted by JF on Feb 26th 2024

    Super easy to install. No cutting required everything fit exactly as it should. Came with all the correct hardware. Didn’t expect anything else from RiffRaff great company with great products. Don’t buy any other kit, you get what you pay for .

  • 5
    MBRP Exhaust

    Posted by Bob on Jul 7th 2020

    Had installed yesterday to replace identical system an exploding tire took out, along with damaging fender! Nice sound, installer said he always recommends MBRP due to consistency of fit.

  • 5
    Raised the Kraken from the depths!

    Posted by Unknown on Feb 13th 2018

    I replaced my 2000 7.3 Ex's stock exhaust with this beauty by MBRB. Took my 15yr old son and I about 2 hours on the driveway to R&R with some Liquid Wrench, reciprocating saw, 14mm and 12mm deep sockets. A little background, my truck has 150k miles and is mostly stock with the exception of an AIRAID CAI, new stock injectors, 6.0 trans cooler and 3-pod pillar to keep an eye on my EGTs, trans temp and boost. Truck runs like a champ but wanted a little more pulling power, lower EGTs and a little growl to let others know this 18 yr old girl has still got it. After installing this exhaust system, I feel like I've got a whole new truck. I think the combination of a good CAI with this exhaust system is key. Gets the air in & out quickly. While driving normal with the wife and windows up, I've got very little to virtually no drone in the cab and can carry on a conversation no problem. WOT with windows down is a different story though. I haven't pulled anything yet to see how she sounds in the cab and how my EGTs will be affected. So far I've noticed my EGTs climb like they did prior to the install but come back down way faster than before. I am very pleased I went with the muffler version too. 7.3s sound a little too throaty for my liking when they're straight-piped. (That's just my personal opinion though. To each their own.) Overall, I am very satisfied with this system and MBRP's standards when it comes to quality workmanship. Oh.....and RR's lighting-fast shipping is the cherry on top.

  • 5
    Fits great!

    Posted by Unknown on Feb 3rd 2017

    I did mine in the garage with a creeper. Had to cut the stock system in 2 places to remove. And had to take out the rear pax shock to install the rear pipe piece. Overall very happy with the fit and sound, and very little increase in noise inside the Ex.

  • 4
    Excellent fit on my '02 Excursion

    Posted by Dave on Nov 24th 2015

    Very Pleased overall with the system. Everything fit like OEM exhaust, zero issues for fit. My previous system was cat back Magnaflow with dual tail pipes. The removed system sounded better IMO and a bit quieter... although the MBRP system sounds very good. I noticed the slightest of drone at a steady 1700 RPM but my wife did not notice it.
    Replaced the system on my back so I had to remove the transmission cross member. Add an hour working alone on your back.