International Bellowed Up-pipes are what you need to cure those leaking stock up-pipes. It isn't a matter of IF but WHEN your factory style up-pipes will start to leak, and when they do this is your permanent answer. Because they used a bellow rather than a donut gasket these kits won't leak and will ensure you are utilizing all your boost to spool the turbo.
When your factory up-pipes leak you will start to see a loss of power, mileage and a gain in EGT's. This kits come complete with everything you need to swap the leaking factory up-pipes for the new bellowed style, including hardware nuts and bolts.
*Ceramic Coating Details -
The Turbo Black ceramic was formulated for exhaust temps up to 2000*F and will hold in at least 60% of the heat from radiating out under your hood. Not all black coatings will achieve that function. These coatings have been specifically formulated for use on military aircraft.
By retaining the heat energy your turbo will spool up faster and more efficiently. We double coat the outside of the pipes to protect them from rusting and it results in a much longer attractive finish while retaining heat. The two main functions of the coating is appearance and longevity of your engine parts and gaining a more efficient running engine.
Click here for install instructions
These kits are Made In The USA, and not overseas like other, lesser quality kits.
Showing reviews 1-10 of 17 | Next
Posted by Timmyjimmy on Jul 9th 2014
easy to install good value definitely worth the time and investment
Riffraff is my new go to on 7.3 parts
Posted by Unknown on Jul 8th 2014
I thought i was going to save some money on the dorman pipes but instead they were about a inch and half to short so really i did 2 up pipe jobs. so save yourself some time and frustration with the international bellowed up pipes. Just remember cheapest ISNT always the way to go.
Posted by Wade on Jul 3rd 2014
These work amazing, mine were starting to slightly leak a little. And I do not regret putting these on, with many many many other Riffraff goodies. Not too bad of an install, Seal tight and get the job done well. Thanks for the great Product!
Posted by Unknown on Jun 17th 2014
My up-pipes were bad enough that I could pull them apart by hand. The install is not that difficult but make sure you take your time. I put the lower bolts in after I aligned the "baby butt" to the turbo. The fit is so good that both pipes aligned almost perfect with the exhaust manifolds. I would also recommend removing the fender liners, it makes access to the lower bolts a breeze. I know it wasn't in the instructions but it worked for me, maybe it will work for you.
Riffraff's shipping was very fast!
Posted by Hoghead on May 10th 2014
I was dreading the install of these pipes but once I got into it it was pretty easy the install instruction are excellent. The hardest part is lining the collector up with the turbo so leave everthing loose until you get that done
Posted by Unknown on May 7th 2014
This is a quality kit; good welds, nice bends and fitment was excellent. Well written install instructions, easy to follow. Truck runs much better and no more donut gaskets!
Posted by Unknown on Apr 29th 2014
Installed this and a mbrp 4" turbo back exhaust. Absolutely thrilled with the results, so much more response than I was getting prior and my egt's dropped by 200 degrees. That being said, this is not an easy install and had my mechanic do it for me. He was also thrilled with such quality components and won't ever go back to the traditional ford donut.
Posted by george on Apr 27th 2014
THANKS FOR PROMPT SERVICE AND GREAT PRICE. WILL NOT HESITATE TO PURCHASE FURTHER SPARES FROM RIFFRAFF WHEN REQUIRED. THANKS AGAIN
Posted by Unknown on Apr 14th 2014
Definitely cured my leaky up pipe problem.
Posted by Unknown on Apr 7th 2014
Somewhat time consuming to get everything lined up right, comes with detailed good instructions for simple install and no more exhaust leaks, ceramic coating looks awesome. Wish I would have got them sooner!
Showing reviews 1-10 of 17 | Next